The GF Series Solids Interceptor is specifically designed to capture and retain solid food particles from drain lines. The use of this Solids Interceptor will reduce pipe maintenance and repair costs and ensure compliance with local discharge regulations. The GF Solids Interceptors are specially designed so they can be installed directly at compartment sinks and other fixtures. Installing the units at the fixtures, removes solids immediatley providing the best protection for the entire plumbing drainage system.

The ECH2O LS Lift Station includes a fiberglass sump with anti-flotation flange, control box with power, pump and level control connects, gasketed and bolted access lid, inlet and vent fittings, overflow baffle, 2" outlet, high temperature submersible sump pump(s) which are controlled by a pressure sensing water level control. The pumps can handle capacities up to 45 gallons per minute and heads up to 22 feet and are low r.p.m. to reduce oil emulsification. If the sump becomes filled with wastewater, the wastewater can flow under an oil dam and through the overflow, trapping the oil and grease in the collection chamber but still allowing effluent to flow into the sewer.

The ECH2O™ Grease Removal System will automatically remove oil, grease, fats, and intercept solids before they cause costly damage and surcharges. The ECH2O™ is an engineered system as defined by the International Plumbing Code and is the most effective method at obtaining compliance with local, state and government regulations.